PRODUCT INFO
The Drive-On Platform Lift is designed to safely raise equipment to desired height or lowered to floor level. The front edge of the platform is beveled to assure a smooth, effortless transfer both on and off the platform surface.
- Makes parts easily reachable
- Prevents back strain
- Increases productivity.
OPTIONS & Resources
- Platforms wider or longer
- Higher lift height
- Galvanized, stainless steel or “Steel-it” epoxy paint available
- Side Loading
- Tape Switches
- Turntable
- Retaining Bar
- Safety Photo Eye
TECHNICAL SPECIFICATIONS
CAPACITY:
1,000/2,000/4,000 lbs
VERTICAL TRAVEL:
28″
SAFETY:
Velocity fuse on each cylinder to eliminate collapsing due to hose failure
Hold down tabs on all four corners
Photo eye to interrupt lowering in the event of an obstruction (optional)
LOWERED HEIGHT:
Floor level
Beveled edge on platform
POWER SUPPLIES:
A/C 115/1/60 volt – Hand control (standard), foot control (optional)
A/C 460/575 volt – Three phase motors (optional)
Air/Hydraulic – Foot control is available
PORTABILITY:
Pins to lock platform 3 1/2” off ground so a pallet truck or fork lift can easily move unit to another area
Side View
Drive-On Platform Lifts
| DO-PL MODEL NO. | CAPACITY (Lbs.) | PLATFORM SIZE (In.) | LOW'D HEIGHT (In.) | VERTICAL TRAVEL (In.) | OVERALL SIZE (In.) | REAR HEIGHT (In.) |
|---|---|---|---|---|---|---|
| DO-PL44-10 | 1000 | 44 x 50 | 3/8 | 28 | 51 x 62 | 46 |
| DO-PL50-10 | 1000 | 50 x 50 | 3/8 | 28 | 57 x 62 | 46 |
| DO-PL44-20 | 2000 | 44 x 50 | 1/2 | 28 | 51 x 62 | 46 |
| DO-PL50-20 | 2000 | 50 x 50 | 1/2 | 28 | 57 x 62 | 46 |
| DO-PL44-40 | 4000 | 44 x 50 | 1/2 | 28 | 51 x 62 | 46 |
| DO-PL50-40 | 4000 | 50 x 50 | 1/2 | 28 | 57 x 62 | 46 |
